Groovy Brackets

Here are the results of this groovy endeavor.  The machine table worked good for making a tongue and groove bracket.  I had to move the piece around a lot to get the groove all the way down the 2x2 stock, which is really 1.25 inches square.  The groove is a little off center, but its cool for the first try...  Looks good anyway...

Then took the length of stock and mitered it for the right angles, and trim to length.  The plywood filler is around 0.360 inches thick, and the milled groove is 0.375 inches, so there is a good fit.  The pieces fit good, but I need to trim them up a bit before I glue them together...